4CH Active Video BALUN Transceiver
View Large
Product Name : 4CH Active Video BALUN Transceiver
Product Origin : China
Product Category : Integrated CCTV monitor/camera systems
More Products : Click here!
Contact Details : ShenZhen HOOTAC Electronics Technology Co., Ltd.
Product Code : HT801TR
Product Details

 


Model HT804R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1.2km using Category-5 Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

 

The unparalleled interference rejection and low emissions of the Model HT801T/HT804T+HT804R  allows long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.














MDL

HT804T Single Transmitter      HT804R 4CH Receiver

Des

Distance:1000-3000ft

Lightning Surge Protection

PWR:+9V to +12V

Cable: CAT5/5E up

24AWG(Φ0.5)or higher


 

Instructions for installmen

 

1:Put the video signals you need in the VIDEO IN of HT804T.

 

2: Put a twisted-pair in the VIDEO+, - of HT804T and HT804R respectively.

 

3: Connect with the mains following instructions shown in the sketch map, make sure that the power should be between DC/AC 9 to 24V.

 

4: set the position of ADJ correctly following the instructions shown below.

 

5: after the four steps, the VIDEO OUT of HT804R is ready to work..

http://www.hootac.com/products_e.htm

 

Product Attachment
File Name : ht804r-2_133101.gif
File Size : 3.76KB     File Type : image/gif
4CH Active Video BALUN Transceiver