We provide both two and three Phase Water/Oil/Gas Separators, like Test Separator, Production Separator and Filter Separator.

l Used for dewatering, degassing and sand removal from crude oil

l Any water content of inlet crude oil are applicable.

l Any contents of oil and gas are applicable;

l Crude oil density is less than 980 Kgs per cubic meter

l Operating temperature is from -10 to 60°C

l Operating pressure from 0.3 to 8.0Mpa

l Processing capability is from 10 to 10,000 cubic meters per day

l Dimensions of the tanks from OD2.2 m x 10 m to OD 3.2 x 18 m

l Average water content in purified crude oil is less than 0.5%

l Average gas content in purified crude oil is less than 0.005g per cubic meters

l Oil content in the treated water is less than 50ppm

 Advantages

l Embedded by pulse electric field. More than 90% of crude oil removal  clean  water once.

l Save the coalescence poling board and packing, Can make the equipment volume reduced by 66.7% and weight reduced by 50%.

l Through the efficient components can remove the capture of gases. With more than 10μm diameter 99% of droplet, gas fluid containing less 0.03 g meet for requirements.

l Using the inclined plate and the pressure inside the process that exclude, to improve the efficiency of clay sand (except (size) > 30μm. Except sand ratio (98%), ensure containers not accumulate sand (mud).

l Using the computer intelligent control, automation system.

l Traditional three-phase separation technology simplified,After the optimization process level, Improve production efficiency.